• Foros
    • Subforo recuperado por miarroba
  • Nuevos mensajes
  • Buscar
  • Usuarios
miarroba
EntrarRegístrate
Conectar usuario
Menú
Foros
Nuevos mensajes
Buscar
Usuarios
Inicio
Handling and precautions for woodworking engraving machine
Responder
cnc-router
cnc-router
Forum administrator
cnc-router
Forum administrator
cnc-router
#1•01/Ago/2019, 10:15
The performance of the woodworking engraving machine itself is important, but the choice of woodworking engraving tools also affects the machining effect and processing efficiency. If you pay for a penny, no matter what kind of things we buy, this sentence is very reasonable. Good woodworking engraving machine has a high machine configuration, good quality parts, and the price is definitely high.

Precautions for loading and unloading of woodworking engraving machine:
1. When cleaning, use a gasoline or WD40 cleaning agent to clean the chuck and pressure cap.
2. Put the chuck into the pressure cap, otherwise the cutter is not easy to install. If the chuck is not clamped in the pressure cap, the chuck will be caught in the motor shaft when the knife is unloaded.
3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.
4. When clamping the tool, the part of the tool that protrudes out of the chuck should not be too long, otherwise it will easily generate vibration during the machining process, which will affect the processing quality of the workpiece surface.
5. When changing the tool, it must ensure that the spindle speed is zero, that is, the tool can be dismantled when the spindle is stopped, otherwise serious personal injury accidents may occur.
6. If you use the presser foot to engrave, you must use a vacuum cleaner to clean the dust on the presser foot and the spindle, and then clamp the tool.
7. In the process of screwing up the cap upwards, be sure to press the cap on the positive rotor thread, first by hand and screw it in place without any effort.
8. When unloading the knife, remove the scrap on the pressure cap and the rotor shaft before unloading the knife.

AnteriorSiguienteArriba
Responder
ATENCIÓN: Este tema no tiene actividad desde hace más de 6 MESES,
te recomendamos abrir un nuevo tema en lugar de responder al actual
Inicio
Opciones:
Suscribir
Permisos:
TU NO PUEDES Escribir nuevos temas
TU NO PUEDES Responder a los temas
TU NO PUEDES Editar tus propios mensajes
TU NO PUEDES Borrar tus propios mensajes
Contactar con el administrador de esta comunidad
Ahora son las 02:14 UTC+08:00
Powered by miarroba.com versión 1.9.9