In the process of processing and operation, the small woodworking carving machine should pay attention to its operation method. The correct operation method can not only make the machine operate normally, avoid damage, but also ensure the safety of the operators themselves.

Safety precautions for operation of small woodworking carving machine:

1. After setting the engraving position, the coordinates of X, y and Z axis workpieces must all be set to "0";

2. Adjust the engraving speed and spindle motor speed to prevent the cutter from breaking due to too fast and too slow speed in the engraving process;

3. In the process of automatic tool setting, please note that the tool setting block must be insulated from the aluminum table of the engraving machine;

4. When carving, if the first knife is not sure, you can slow down the feed speed. If you think the carving is normal, you can restore the speed to normal. You can also simulate carving in the blank area to see if it is normal;

5. If the small woodworking carving machine is not used for a long time, it should be refueled and idled every week to ensure the flexibility of the transmission system;

6. The continuous operation time of small wood engraving machine shall not exceed 10 hours / day. In order to ensure the cleanness of the cooling water and the normal operation of the water pump, the water-cooled spindle motor shall not be short of water, and the cooling water must be replaced regularly to prevent the water temperature from being too high. As much circulating water as possible can be replaced by a large capacity water tank;

7. After each use of woodworking carving machine, pay attention to cleaning, clean the dust on the platform and transmission system, and regularly lubricate the X, y and Z axes of the transmission system;

8. When operating the woodworking carving machine, operators should wear dust masks and protective glasses to avoid the dust and other dust generated in the processing process from invading the human body and causing discomfort;

9. Small wood engraving machine routine maintenance method in wood engraving machine to add a certain amount of dust-proof and dust-proof device, choose dust-proof equipment matching use.