The current is the sales season of engraving machine, today to everyone to explain the common woodworking engraving machine safety operation notice, for your reference, in the use of woodworking engraving machine, usually should pay attention to the following points:

1. After the carving position is determined, the workpiece coordinates of X, Y and Z axis must all be classified as "0".
2. adjust the carving speed and spindle motor speed, to prevent carving speed too fast, speed too slow and broken knife.
3. automatic knife, pay attention to the knife block must be insulated with the engraving machine aluminum table.
4. When carving, if you are not sure of the first knife or are afraid of making mistakes, you can adjust the feeding speed to slow down, and then adjust the speed back to normal when you think the carving is normal; You can also simulate sculpture in the air, to see if it is normal.
5. if you do not use woodworking engraving machine for a long time, you should regularly refueling idling every week, the best for every week, to ensure the flexibility of the transmission system.
6. The continuous running time of woodworking engraving machine is less than 10 hours/day; Ensure the cleaning of cooling water and normal operation of water pump, must not make water cooling spindle motor water shortage phenomenon, regular replacement of cooling water to prevent excessive water temperature, circulating water as much as possible, can be replaced with large capacity water tank.
7. After each use of woodworking and engraving machine, please pay attention to cleaning. Dust on the platform and driving system must be cleaned; Lubricate the X, Y and Z axis of the drive system regularly.
8. the operator had better be in the operation of woodworking carving machine to wear dust mask and protective glasses, in order to avoid the dust generated during the process of the invasion of the human body, causing discomfort.
9. woodworking engraving machine daily maintenance methods to woodworking engraving machine plus a certain dust removal device, choose dust removal equipment supporting use.

The above is about the relevant content of woodworking engraving machine, I hope to help you.